Notifications
Clear all
27/02/2019 6:12 pm
Hi all,
Does anyone have service manual for Siemens G40?
Or steps to replace cmos battery?
Any help is appreciated.
Thanks all.
27/02/2019 6:35 pm
CHANGING THE CMOS BATTERY IS SAME AS ALL DEVICES ,PLEASE CHECK THE ATTACHMENT
- Turn off the Machine.
- Unplug the Machine.
- Remove the side cover. (Make sure to put on your static wrist band )
- Remove old battery with fingernail or use non-conductive screwdriver.
- Install new battery.
- Replace side cover.
- Plug back in.
- Turn Machine
- Go to Bios and set the time and date
(IF YOU STILL NEED THE SERVICE MANUAL PLEASE LET ME KNOW AT [email protected])