Ge Vivid and Logiq ADM Login
Logging on to Most VIVID/LOGIQas ‘ADM’
As default, two users are defined, USR and ADM.
• USR If you log on as USR, you will have access to do set-up tasks that a user may need to do during daily use.
To select a printer.
As default, no password has been set for USR. Just type the name USR and select Login.
• ADM If you log on as ADM, you will have access to do general set-up and service adjustments.
Adjust network and connectivity settings.
As default, the password for ADM is ulsadm. Select the name ADM, the password (ulsadm) and select Login.
It is possible for the administrator (ADM) to establish new users and set unique passwords for each user, including a new password for ADM. If the login as ADM fails, contact the responsible person in the hospital to get access.
Hi, I need to change a language of logic c5
A new topic has been created about system setup
Please follow instructions.if you need help contact us at [email protected]
hello, I can’t log into GE VIVID 7 as ADM, the ulsadm password doesn’t work, what should I do?
I need to change the date and time
@armen80 Please Try uls as password
Log on as External Service with password: gogems (all lowercase letters).
1.) Press Config (F2).
2.) Log on as ADM (administrator).
- Password, software v6.x and later: ulsadm
- Password, software v5.x and earlier: notthing (leave empty).
NOTE: If the passwords above don’t function, please ask the customer for the correct password
also if no of the above works go to bios and chnage date and time
The BIOS password for a BEP3 and BEP4 is "shiunn"
@armen80 You are welcome.
also consider getting premium membership too
which give access to a lot of premium features.
Hello admin on vivid7 motherboard deteriorated how to replace with another?
contact via whats app 00971563178384 for tech support